Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- project:uv-exposure-based-pcb [2015-07-12 03:43] – [etching the pcb] 186.220.75.172
+++ project:uv-exposure-based-pcb [2020-07-20 10:38] – ↷ Links angepasst weil Seiten im Wiki verschoben wurden neos
@@ Zeile 3: / Zeile 3: @@
 ====== What is it? ======
-For reproduceable results when making PCBs and super-tiny structures, there is a UV-Device for making PCBs now. Making PCBs with UV Exposure requires that some things are done in a different way to when making them with the [[project:beta-layout:pcbprinter|printer]]. This document should at some point give an overview what steps are needed to make a pcb and what things you should take care of.
+For reproduceable results when making PCBs and super-tiny structures, there is a UV-Device for making PCBs now. Making PCBs with UV Exposure requires that some things are done in a different way to when making them with the [[friedhof:beta-layout:pcbprinter|printer]]. This document should at some point give an overview what steps are needed to make a pcb and what things you should take care of.
 ====== Disclaimer / Who may use the hardware ======
@@ Zeile 93: / Zeile 93: @@
 | Bungard Platinen-Basismaterial, Conrad 529184 et al | SMD, <0.5mm | 180 seconds | golden | 2 seconds | fine parts vanished though not as bad as with proma, still inacceptible |
 | Bungard Platinen-Basismaterial, Conrad 529184 et al | SMD, <0.5mm | 700 seconds | golden | 5 seconds | nice! |
+| Bungard Platinen-Basismaterial, Reichelt | SMD, <0.5mm | 120 seconds | - | 30 seconds | OK - but not the best |