project:hgg:open_tasks:sensor:testing:manual_cable_trigger_for_tuntime_measurement
Dies ist eine alte Version des Dokuments!
Manual cable trigger for tuntime measurement
Signal runtime measuring in a cable
The signal runtime of each cable has to be calculated or measured, so that an ordinary pushbutton can be used to trigger all 4 events and one doesn't have to send an event time. Therefor the runtim has to be known of each cable to add this to the triangulation calculations. If an arduino is capable of measuring runtimes in cables of 2m looping from and back to an arduino, this can be used instead of calculations. More informations are needed.
project/hgg/open_tasks/sensor/testing/manual_cable_trigger_for_tuntime_measurement.1326287833.txt.gz · Zuletzt geändert: 2012-01-11 14:17 von horn